Sunday, September 15, 2013

The best way to Etch Stainless Steel Jewellery

The traditional strategy of etching stainless steel employs caustic chemicals like ferric chloride, hydrofluoric acid, nitric acid. Dangerous is surely an understatement. You can also check out applying an engraving tool, but unless of course you may have a really regular hand, you wind up with a little something that seems to be like chicken scratch. Etching doesn't need to be risky or consider nerves of steel. You can etch your stainless steel jewelry basically and effortlessly.

1 Reduce two 15-inch pieces of wire.

two Employing your wire strippers, strip about one inch in the insulation off each ends in the wires.

3 Attach one particular wire to your red alligator clip along with the other 1 towards the black alligator clip.

4 Attach the other ends of the wire on the battery. The wire with the black alligator clip has to be attached on the damaging (-) terminal as well as the wire with the red alligator clip has to be connected to the favourable ( ) terminal.

five Scrub the side with the puppy tag you can be etching using the green scouring pad.

six Put around the surgical gloves and wipe the freshly scoured tag that has a cotton ball soaked in rubbing alcohol. (It truly is critical that you simply tend not to get any oils out of your skin around the canine tag.)